Verlauf Security Systems Private Limited

Features:
UL listed
Dual LED’s for 360 visibility.
Advanced detection and communication protocol.
Easy installation and maintenance.
Sleek low-profile housing design.
Regular 100mm base.

Technical Specification Eaton Product Datasheet Addressable Fire ProductsInstallation
1. Surface call point has standard rear BESA fixing facilities.In addition, back box can accept top or bottom surface entry cables. Surface call point can also be flush mounted.
2. Callpoint has test facility via special test key to prevent unauthorized operation.
3. Insertion of test key for test purposes and for cover removals at bottom of callpoint to facilitate ease of access when mounted next to door architrave.
4. Test key is dual function, used to test callpoint operation bysimulating activation and also to allow removal of clip on coverto gain access to element.
5. Element is held in place by clip on self locking cover which can only be removed by use of a special tool (callpoint test key).
6. Separate loop in and loop out terminals are provided forall connections including screen continuity on intelligent addressable callpoints.
7. Surface/flush call points are IP42, weatherproof is IP65.Description Code Surface/Flush Call point CBG370SWaterproof Call point CBG370WPProtective Hinged Cover CXPC Spacer Plates (pack of 10) MBGSP Recessing Bezels (pack of 10) MBGBEZ Resettable Element Kit (pack of 10) MBGRE KIT Spare Break Glasses (pack of 5) UBSG Callpoint keys (pack of 10) MFBGKEY3Catalogue numbers DHW WARNING:Do NOT use high voltage testers if ANY equipment is connected to the system.Screen (Earth) must be continuous along entire length of loop.LOO PIN LOOPOUT Compatible Cooper Intelligent Addressable Control Panel E - + E - +Screen INOUT Screen Standard ConnectionsDimensionsCBG370S/WP Intelligent Addressable Call points Description H (mm) W (mm) D (mm)Flush Mounted 87 87 36Surface Mounted 87 87 57Weatherproof 87 87 59User Interface1. To enable quick and simple installation, call points usea fast fit self locking clip on front cover which is very simple to fit, but once in place, can only be removed byuse of a special key (supplied).2. Callpoint is triggered by pressing against the element.Code CBG370S CBG370WPDescription Surface / Flush Mounting Callpoint Weatherproof Callpoint Standards EN54 Pt11 EN54 Pt11SpecificationOperating Voltage 17V dc to 32V dc 17V dc to 32V dc Quiescent Current < 250μA < 250μAEnvironmentalOperating Temperature -10°C to +55°C -10°C to +55°C Humidity (Non Condensing) 0 to 93% RH 0 to 93% RHPhysical Construction PC/ABS PC/ABS Colour Red Red Dimensions (H x W x D) 87mm x 87mm x 57mm (36mm flush) 87mm x 87mm x 59mmWeight 0.2kg 0.2kgIngress Protection IP42 IP65CompatibilitySuitable for use with Cooper Intelligent Addressable Fire Systems Cooper Intelligent Addressable Fire Systems

Features:
UL listed
Dual LED’s for 360 visibility.
Advanced detection and communication protocol.
Easy installation and maintenance.
Sleek low-profile housing design.
Regular 100mm base.